|
Model:
|
Capacity 140,000 lbs.
|
| |
Width 12'
|
| |
Axles 6 (3+3)
|
| |
Estimated weight 34,500 lbs.
|
| |
|
|
Front Frame:
|
Fabricated beams made from 100,000 psi rated steel.
|
| |
Coupler section with heavy duty coupler plate with turntables and hydraulic cylinders that automatically guide rear axles including a fixed h. duty pin on the front extension and a removable pin on the pin on the gooseneck.
|
| |
Schnable neck with 52" hydraulically raising extension.
|
| |
Hydraulic gooseneck with 2 cylinders to raise neck, and another 2 cylinders to elevate head for adjustment of tower dim.
|
| |
Possibility to raise the tower 36" of ground. Fast hook up system to tower with 4 hooks.
|
| |
|
|
Rear Frame:
|
Fabricated beams made of 100,000 psi rated steel. Tapered frame width from front to rear for max tower insertion in frame (reduce the height). Tower at rear 21" at rear and 17" at front. 6 rounded shaped cradle to support tower. Rear stopper with back plate to secure tower. Plastic fenders over each axle
|
| |
|
|
Suspension:
|
Hendrickson HT-250 air ride axles located with the following spread, 60" - 60" - 14'2" - 60" - 70". 6 axles rated at 25,000 lbs. capacity with D22 spindle end, 23" track with dust shield and cam enclosure (drop axles).
|
| |
3 rear force steer axles.
|
| |
Brake size 12.25" x 7.50" x .75" non asbestos lining Q brakes.
|
| |
Stemco guardian HP oil seal.
|
| |
Stemco cups and bearings.
|
| |
Dura light 8 studs steel piloted hubs with cast drums.
|
| |
Alsoa aluminum tubeless wheels, 17.50" x 7.50" in machine finish.
|
| |
Michelin XZE2 245/70R/17.5 18 ply tires.
|
| |
Rockwell wabco brake system comply with FMVSS 121. TSE brake chambers maxi 30/30.
|
| |
Automatic rockwell slack adjuster.
|
| |
Scale-O- Matic liquid fill gauge with manual dump valve.
|
| |
|
|
Hydraulic:
|
Hydraulic closed in circuit with 2 seperate circuits for safety purposes with the auto steer axles. One power pack installed on the front gooseneck with a 13 HP Honda motor with pump, reservoir installed inside a closed and vented aluminum box.
|
| |
Power pack operates the gooseneck and steer manually + automatically the axles.
|
| |
Hand held remote control to activate the axles from a distance.
|
| |
100 ft of hydraulic lines supplied for front hook up.
|
| |
Front extension of neck is hydraulically raised.
|
| |
|
|
Electrical:
|
LED sealed lights installed as per FMVSS 121.
|
| |
7 way recepticle with 7 wire main cable.
|
| |
Junction box is Scepter sealed.
|
| |
Removable strobe light
|
| |
|
|
Paint:
|
100% all steel shot blasted.
|
| |
Epoxy primer, and 2 coats of non metallic urethane paint.
|
| |
55 % reflective tape on sides and bumper per regulations.
|
| |
|
|
Accessories:
|
Title holder, step at gooseneck, 100' of air and electrical cable supplied for extension, removable wide load sign, chains on front axle to raise them for return haul.
|
