|
Model:
|
Width 10' - 0" over axles
|
| |
Weight 23,000 lbs.
|
| |
4 Axles
|
| |
Capacity 116,000 lbs.
|
| |
|
|
Front frame:
|
Fabricated beams made from 100,000 psi rated steel.
|
| |
Coupler section with heavy duty bolt on Jost king pin and turn table with cylinders to automatically guide the rear axles. 1/2" CHT -100 coupler plate. Removable saddle for top tower section. Hydraulic gooseneck with 2 cylinders to raise the neck plus 2 other cylinders to elevate the head. 4 hook system for faster tower connection. The neck will attach to the top and mid tower sections. Main gooseneck can be split at the front coupler area (to detach neck).
|
| |
|
|
Rear Frame:
|
Fabricated "I" beams made of 100,000 psi rated steel.
|
| |
4 removable saddles for the different tower sections.
|
| |
Heavy duty D-rings at rear frame plus two tower stoppers.
|
| |
Plastic fenders over each axle, and aluminum support basket for hydraulic, air and electrical lines
|
| |
Front drawbar removable to pull the dolly when returning empty without the gooseneck.
|
|
Suspension:
|
Hendrickson HT-250 air ride. Force steer axles rated at 25,000 lbs. with D22 spindle end, 98.5" track with dust shield and cam enclosure
|
| |
Brake size 15" x 5/8" x 3/4" (special for 19.5 wheels) non asbestos Q brakes.
|
| |
Stemco Guardian HP oil seal, Stemco cups and bearings.
|
| |
Dura light 8 studs steel piloted hubs withcast drums.
|
| |
Alcoa aluminum wheels, tubeless 19.5" x 7.5" machine finished.
|
| |
Tires 245/70R17.5 Michelin XZY2+.
|
| |
Rockwell Wabco brake system comply with FMVSS 121.
|
| |
TSE 30T brake chambers with protection valve.
|
| |
Haldex automatic slack adjuster.
|
| |
Scale- O - Matic liquid fill gauge with manual dump valve.
|
| |
|
| |
|
|
Hydraulic:
|
Hydraulic closed in circuit with 2 seperate circuits for safety purposes to auto steer axles.Power pack with 13 HP Honda motor with pump, reservoir and hydraulic control circuit for automatic and manual steer installed inside a closed and vented aluminum box installed on the front coupler.Hand held remote control to activate the axles from a distance.100 ft of hydraulic lines supplied for front hook up.
|
| |
|
|
Electrical:
|
LED sealed lights installed as per FMVSS 108.
|
| |
7 way recepticle with 7 wire main cable, junction box is Scepter sealed.
|
| |
Removable strobe light.
|
| |
|
|
Paint:
|
100% all steel shot blasted. Epoxy primer, and 2 coats of non metallic urethane paint.
|
| |
55 % reflective tape on sides and bumper per regulations.
|
| |
|
|
Accessories:
|
Title holder, step at gooseneck, 100' of air and electrical cable supplied for front hook up, removable wide load sign, Winches plus steel cables and straps to hold the hydraulic air and electrical cables.
|
| |
|
